Photos & Articles

Cover Guy

Sweeping Magazine

After only 2 years in the business it was an honor to be featured on the cover of the industry's leading trade publication.  I was receiving my CSIA Certification after completing a week long training in Indianapolis, IN.  This class was the first of its kind at the Chimney Safety Istitute of America. We were studying the characteristics and affects of chimney fires when I was captured in this photo. 

 

WHY SWEEP IN THE SPRING?

Learning about Creosote

D.S. McEwen- 3/14/17

Don't be discouraged if the first paragraph or so contain technical trivia. It will quickly transform into the practical, with tips and reasons to take action. Hopefully you will be entertained along the way.

 

Creosotes are a category of carbonaceous chemicals formed by the distillation of various tars and by pyrolysis of plant-derived material, such as wood or fossil fuel.” The more common kind of fossil fuel type creosote is Coal-tar creosote which is regularly used as a preservative in wood such as power poles and railroad ties. Wood-tar creosote is commonly known for its ability to preserve and flavor meat such as smoked samon or beef jerky. One of its lesser known uses is for it's medicinal properities. Guaiacol is a phenol which makes up 25% of the creosote in the wood from Beech trees.2 A synthetic modification of this phenol is used to manufacture such medications a Mucinex and Robitussin.

 

Creosote in your chimney occurs as the byproducts of incomplete combustion (smoke) cool off and condensate on the walls of the chimney. This is liquid fuel. As the chimney heats up with the fire and these warm flue gases, this liquid fuel will dry and form a layer of solid fuel commonly called Soot.

 

This fuel can ignite whenever exposed to heat. The amount of creosote inside a chimney when it ignites is one of the main factors that determins whether the chimney fire will do damage (heavy accumulation), be noticed without doing damage (moderate accumulation) or whether it will even be noticed as having occured (lite accumulation).

 

The exact recipe of conditions for this ignition to occur is not something easily described or controlled. Therefore, the method used to ensure safer fireplace operation is to have the creosote removed regularly to keep it from accumulating to dangerous levels. This is why you call a chimney sweep.*

 

5 Reasons to Sweep in the Spring

  1. Price - The demand for having the chimney ready for the holiday parties that exceeds the supply of chimney sweeps is no longer driving the cost.

  2. Protection - Creosote is acidic and will errode the masonry and corrode the metal of the chimney. Sweeping just before you start using it means your chimney is under constant assault. Whereas sweeping in the Spring eliminates potentially 6-8 months of wear on your chimney. A 30 year old chimney may then only have 10-15 years of wear on it.

  3. Preparation - In the event that your chimney is in need of repair, you have several months to save up the money and then have the repairs completed before the next burning season begins.

  4. Peace of Mind - Sometimes that first brief cold snap comes in September other times, late October. Instead of trying to get your chimney sweep on the schedule, like everyone else, you can go ahead an enjoy a fire because you planned ahead.

  5. Potentially you can save on your energy bill. 75% of the chimneys I sweep have the damper open. Chimneys swept in the Spring, Summer and early Fall usually have not been in use for a while. That means dampers were left open because homeowners either forget or never close them. Leaving a damper open is akin to leaving a window open. Experts say this could amount to a loss of $300-$500 in the annual energy bill, much more than the cost of a sweep. I always leave the dampers closed when I leave a residence unless instructed otherwise.

1. Price, Kelogg & Cox 1909, p. 7

2. Lee et al. 2005, p. 1483

*See article on Chimney Sweeping Logs

Rusted Pan

10 year old builders grade chase pan

This is a typical builder grade galvanized chase pan.  This pan is small enough that it could have easily been made out of one sheet of metal instead of seamed as this one. This one also does not have a proper turn down which should cover the vertical trim boards on the corners of the chase.   At least this pan has a drip edge on the turn down which prevents surface tension from causing water to creep up underneath the cover.

Chase Pan & Shroud

New covers with Coated Metal

This is a chase pan & shroud that is manufactured with a metal that has a black coating that protects it from rusting or weathering. These covers were installed on Mikandy Road in Kennesaw on 5/9/2005. See below for a more recent photo.

12yr Old Pan & Shroud

Mikandy Road in Kennesaw- 2/16/17

These are the same covers seen in the picture above. Although one of the trees is missing and some of the siding has been replaced the covers show very little change. If they had been the standard painted covers instead of the coated you would see that the paint would have faded, chipped and pealed.

PrintPrint | Sitemap
© David McEwen - 1&1 MyWebsite

Call

E-mail